Software of the Month Club 1994 December

home *** CD-ROM | disk | FTP | other *** search

/ Software of the Month Club 1994 December / SOFM_Dec1994.bin / mac / Utilities / Chiron Error Codes / Chiron v2.0.1 / Chiron v2.0.1.rsrc / TEXT_132.txt < prev next >

Wrap

Text File | 1994-02-06 | 32KB | 693 lines

Negative System Error Codes System Errors (VBL Mgr, Queue, Etc.) 0 noErr 0 for success *OR* 0 smNotTruncated No truncation necessary -1 qErr queue element not found during deletion *OR* -1 smTruncErr Truncation indicator alone is wider than the specified width -2 vTypErr invalid queue element -3 corErr core routine number out of range -4 unimpErr unimplemented core routine -5 SlpTypeErr invalid queue element -8 seNoDB no debugger installed to handle debugger command Color Manager Errors -9 iTabPurgErr from Color2Index/ITabMatch -10 noColMatch from Color2Index/ITabMatch -11 qAllocErr from MakelTable -12 tblAllocErr from MakelTable -13 overRun from MakelTable -14 noRoomErr from MakelTable -15 seOutOfRange from SetEntry -16 seProtErr from SetEntry -17 i2CRangeErr from SetEntry -18 gdBadDev from SetEntry -19 reRangeErr from SetEntry -20 seInvRequest from SetEntry -21 seNoMemErr from SetEntry I/O System Errors -17 controlErr Driver can't respond to Control call -18 statusErr Driver can't respond to Status call -19 readErr Driver can't respond to Read call -20 writErr Driver can't respond to Write call -21 badUnitErr Driver ref num doesn't match unit table -22 unitEmptyErr Driver ref num specifies NIL handle in unit table -23 openErr Requested read/write permission doesn't match drivers open permission, or Attempt to open RAM serial Driver failed -24 closErr Close failed; Permission to close .MPP driver was denied -25 deRemovErr DrvrInstall couldn't find driver in resources -27 abortErr IO call aborted by Killl0; Publisher has written a new edition *OR* -27 iLoAbortErr IO abort error (Printing Manager) -28 notOpenErr Couldn't rd/wr/ctl/sts cause driver not opened -29 unitTblFullErr Unit table has no more entries -30 dceExtErr dce extension error File System Errors -33 dirFulErr Directory full -34 dskFulErr Disk Full -35 nsvErr No such volume; volume not found -36 ioErr I/O error (bummers) -37 bdNamErr Bad file name; there may be no bad names in the final system! -38 fnOpnErr File not open -39 eofErr End of file; no additional data in the format -40 posErr Tried to position to before start of file (r/w) -42 tmfoErr too many files open -43 fnfErr File not found; Folder not found; Edition container not found; Target not found -44 wPrErr Diskette is write protected; Volume is locked through hardware -45 fLckdErr File is locked -45 fLckdErr Publisher writing to an edition -46 vLckdErr Volume is locked through software -47 fBsyErr File is busy (delete); Section doing I/O -48 dupFNErr Duplicate filename (rename); File found instead of folder -49 opWrErr File already open with with write permission -50 paramErr Error in user parameter list -51 rfNumErr Reference number invalid -52 gfpErr Get file position error -53 volOffLinErr Volume is off line -54 permErr Software lock on file; Not a subscriber [permissions error on file open] -55 volOnLinErr drive volume already on-line at MountVol -56 nsDrvErr no such drive (tried to mount a bad drive num) -57 noMacDskErr not a mac diskette (sig bytes are wrong) -58 extFSErr External file system - file system identifier is nonzero -59 fsRnErr file system internal error: during rename the old entry was deleted but could not be restored... -60 badMDBErr bad master directory block -61 wePermErr Write permissions error; Not a publisher Font Manager Errors -64 fontDecError error during font declaration -65 fontNotDeclared font not declared -66 fontSubErr font substitution occured Disk, Serial Port, Clock Specific Errors -64 lastDskErr -64 noDriveErr drive not installed -65 offLinErr r/w request for an off-line drive -66 noNybErr couldn't find 5 nybbles in 200 tries -67 noAdrMkErr couldn't find valid addr mark -68 dataVerErr read and verify compare failed -69 badCksmErr addr mark checksum didn't check -70 badBtSlpErr bad addr mark bit slip nibbles -71 noDtaMkErr couldn't find a data mark header -72 badDCksum bad data mark checksum -73 badDBtSlp bad data mark bit slip nibbles -74 weUnderrun write underrun occured -75 cantStepErr step handshake failed -76 tkOBadErr track 0 detect doesn't change -77 initIWMErr unable to initialize IWM -78 twoSideErr tried to read 2nd side on a 1-sided drive -79 spdAdjErr unable to correcetly adjust disk speed -80 seekErr track number wrong on address mark -81 sectNFErr sector number never found on a track -82 fmt1Err can't find sector 0 after track format -83 fmt2Err can't get enough sync -84 verErr track failed to verify -84 firstDskErr -85 clkRdErr unable to read clock value twice -86 clkWrErr time written did not verify -87 prWrErr parameter ram written didn't read-verify -88 prInitErr InitUtil found the parameter ram uninitialized -89 rcvrErr SCC receiver error (framing, parity, OR) -90 breakRecd Break received (SCC) AppleTalk Errors -91 ddpSktErr Error opening socket *OR* -91 eMultiErr Invalid address or table is full -92 ddpLenErr Data lenth too big *OR* -92 eLenErr Packet too large or first entry of the write data structure did not contain the full 14-byte header -93 noBridgeErr No router available [for non-local send] -94 lapProtErr error in attaching/detaching protocol *OR* -94 LAPProtErr Protocol handler is already attached, node's protocol table is full, protocol not attached, or protocol handler pointer was not 0 -95 exceesCollsns Hardware error [excessive collusions on write] -97 portInUse driver Open error code (port is in use) -98 portNotCf driver Open error code (parameter RAM not configured for this connection -99 memROZEErr hard error in ROZ -99 memROZEError hard error in ROZ -99 memROZWarn soft error in ROZ Scrap Manager Errors -100 noScrapErr No scrap exists error -102 noTypeErr Format not available [no object of that type in scrap] Storage Allocator Errors -108 memFullErr Ran out of memory [not enough room in heap zone] -109 nolHandleErr GetHandleSize fails on bsaeText or substitutionText; NIL master pointer [handle was NIL in HandleZone or other] -110 memAdrErr Address was odd, or out of range -111 memWZErr Attempted to operate on a free block; GetHandleSize fails on baseText or substitionText [WhichZone failed (applied to free block)] -112 memPurErr Trying to purge a locked or non-purgeable block -113 memAZErr Address in zone check failed -114 memPCErr Pointer Check failed -115 memBCErr Block Check failed -116 memSCErr Size Check failed -117 memLockedErr Trying to move a locked block (MoveHHI) HFS Errors -120 dirNFErr Directory not found -121 tmwdoErr No free WDCB available -122 badMovErr Move into offspring error -123 wrgVolTypErr Not an HFS volume [wrong volume type error or (obsolete) operation not supported for MFS] -124 volGoneErr Server volume has been disconnected -125 updPixMemErr Insufficient memory to update a pixmap -127 fsDSIntErr Internal file system error Menu Manager Errors -126 dsMBarNFnd System error code for MBDF not found -127 dsHMenuFindErr Could not find Hmenu's parent in MenuKey -128 userCanceledErr User canceled an operation HFS File ID Errors -130 fidNotFound no file thread exists -131 fidNotAFile directory specified -132 fidExists file id already exists Color QuickDraw & Color Manager Errors -147 regionTooBigError Region too big or complex -148 pixMapTooBigErr Pixel map record is deeper than 1 bit per pixel [passed pixelmap is too large] -149 notEnoughStack Not enough stack space for the necessary buffers *OR* -149 mfStackErr Insufficient stack -150 cMatchErr Color2Index failed to find an index -151 cTempMemErr Failed to allocate memory for temporary structures -152 cNoMemErr Failed to allocate memory for structure -153 cRangeErr Range error on colorTable request -154 cProtectErr ColorTable entry protection violation -155 cDevErr Invalid type of graphics device -156 cResErr Invalid resolution for MakelTable -157 cDepthErr Invalid pixel depth -158 cParmErr Invalid parameter Resource Manager Errors (other than I/O Errors) -185 badExtResource Extended resource has a bad format -186 CantDecompress Resource bent ("the bends") -188 resourceInMemory Resource already in memory -189 writingPastEnd Writing past end of file -190 inputOutOfBounds Offset or count out of bounds -192 resNotFound Resource not found -193 resFnotFound Resource file not found -194 addResFailed AddResource failed -195 addRefFailed Add Reference failed -196 rmvResFailed RmveResource failed -197 rmvRefFailed RMVEReference failed -198 resAttrErr Attribute inconsistent with operation -199 mapReadErr Map inconsistent with operation Sound Manager Errors -200 noHardware Required sound hardware not available [no hardware support for the specified synthesizer] -201 notEnoughHardware Insufficient hardware available [no more channels for the specified synthesizer -203 queueFull No room in the queue -204 resProblem Problem loading the resource -205 badChannel Channel is corrupt or unusable [invalid channel queue lenth] -206 badFormat Resource is corrupt or unusable -207 notEnoughBufferSpace Insufficient memroy available -208 badFileFormat File is corrupted or unusabe, or not AIFF or AIFF-C -209 channel Channel is busy -210 buffersTooSmall Buffer is too small -211 channelNotBusy Channel not currently used -212 noMoreRealTime Not enough CPU time available -213 badParam A parameter is incorrect -220 siNoSoundInHardware No sound input hardware available -221 siBadSoundInDevice Invalid sound input device -222 siNoBufferSpecified No buffer specified -223 siInvalidCompression Invalid compression type -224 siHardDiskTooSlow Hardrive too slow to record -225 siInvalidSampleRate Invalid sample rate -226 siInvalidSampleSize Invalid sample size -227 siDeviceBusyErr Sound input device is busy -228 siBadDevice Name Invalid device name -229 siBadRefNum Invalid reference number -230 siInputDeviceErr Input device hardware failure -231 siUnknownInfoType Unknown type of information -232 siUnknownQuality Unknown quality MIDI Manager Errors -250 midiNoClientErr no client with that ID found -251 midiNoPortErr no port with that ID found -252 midiTooManyPortsErr too many ports already installed in the system -253 midiTooManyConsErr to many connections made -254 midiVConnectErr pending virtual connection created -255 midiVConnectMade pending virtual connection resolved -256 midiVConnectRmvd pending virtual connection removed -257 midiNoConErr no connection exits between specified ports -258 midiWriteErr couldn't write to all connected ports -259 midiNameLenErr name supplied is longer than 31 characters -260 midiDuplDErr duplicate client ID -261 midiInvalidCmdErr command not supported for port type Notification Manager Errors -299 nmTypeErr Invalid qType-must be ORD(nmType) Start Manager Errors -290 smSDMInitErr SDM could not be initialized -291 smSRTInitErr Slot Resource Table could not be initialized -292 smPRAMInitErr Slot Resource Table could not be initialized -293 smPriInitErr Cards could not be initialized -300 smEmptySlot No card in slot -301 smCRCFail CRC check failed for declaration data -302 smFormatErr FHeader Format is not Apple's -303 smRevisionErr Wrong revision level -304 smNoDir Directory offset is Nil -305 smLWTstBad Long Word test field <> $5A932BC7 -306 smNosInfoArray No sInfoArray. Memory Mgr error. -307 smResrvErr Fatal reserved error. Reserved field <> 0. -308 smUnExBusErr Unexpected Bus Error -309 smBLFieldBad ByteLanes field was bad. -310 smFHBlockRdErr Error occured during _sGetFHeader -311 smFHBlkDispErr Error occured during _sDisposePtr (Dispose of FHeader block). -312 smDisposePErr _DisposePointer error -313 smNoBoardsRsrc No Board sResource -314 smGetPRErr Error occured during _sGetPRAMRec (See SIMStatus) -315 smNoBoardId No baord Id -316 smIntStatVErr The initStatusV field was negative after primary or secondary init. -317 smIntTbleVErr An error occured while trying to initialize the Slot Resource Table. -318 smNoJmpTbl SDM jump table could not be created. -319 smBadBoardId BoardId was wrong, re-init the PRAM record. -320 smBusErrTO BusError time out. -330 smBadRefld Reference Id not found in list -331 smBadsList Bad sResource [sList] structure: Id1<Id2<Id3 ... format is not followed. -332 smReservedErr Reserved field not zero -333 smCodeRevErr Code revision is wrong -334 smCPUErr Code revision is wrong -335 smsPointerNil LPointer is nil {From sOffset Data. If this error occurs, check sInfo rec for more information} -336 smNilsBlockErr Nil sBlock error {Don't allocate and try to use a nil sBlock} -337 smSlotOOBErr Slot out of bounds error -338 smSelOOBerr Selector out of bounds error; function not implemented -339 smNewPErr _NewPtr error -340 smBlkMoveErr _BlockMove error -341 smCkStatusErr Status of slot = fail -342 smGetDrvrNamErr Error occured during _sGetDrvrName -343 smDisDrvrNamErr Error occured during _sDisDrvrName -344 smNoMoresRsrcs No more sResources *OR* -344 smNoMoresResources Specified sResource data structure not found -345 smsGetDrvrErr Error occured during _sGetDriver -346 smBadsPtrErr Bad pointer was passed to sCaldsPointer function -347 smByteLanesErr ByteLanes field in card's format block was determined to be zero -348 smOffsetErr Offset was too big (temporary, should be fixed) -349 smNoGoodOpens No opens were successful in the loop -350 smSRTOvrFlErr SRT over flow -351 smRecNotFnd Record not found in the SRT Misc. Device Manager Errors -360 slotNumErr invalid slot # error -400 gcrOnMFMErr gcr format on high density media error Edition Manager Errors -450 editionMgrInitErr Manager not initialized or could not load package -451 badSectionErr Not a valid section type -452 notRegisteredSectionErr Not registered -454 badSubPartErr Bad edition container spec or invalid edition container -460 multiplePublisherWrn Already is a publisher -461 containerNotFoundWrn Alias was not resolved -463 notThePublisherWrn Not the publisher SCSI Manager Errors -470 scsiBadPBErr invalid field(s) in the parameter block -471 scsiOverrunErr attempted to transfer too many bytes -472 scsiTransferErr write flag conflicts with data transfer phase -473 scsiBusTOErr bus error during transfer -474 scsiSelectTOErr scsiSelTO exceeded (selection failed) -475 scsiTimeOutErr scsiReqTO exceeded -476 scsiBusResetErr the bus was reset, so your request was aborted -477 scsiBadStatus non-zero (not "Good") status returned -478 scsiNoStatusErr device did not go through a status phase -479 scsiLinkFailErr linked command never executed -489 scsiUnimpVctErr unimplemented routine was called DeBugger Errors (SysErrs used instead of inline $A9FF & $ABFF) -490 userBreak user debugger break -491 strUserBreak user debugger break - display string on stack -492 exUserBreak user debugger break - execute commands on stack Misc. QuickDraw, TextEdit and O/S Errors -500 rgnTooBigErr Bitmap would convert into a region greater than 64 KB -501 teScrapSizeErr scrap item too big for text edit record -502 hwParamrErr bad selector for _HWPriv Process Manager Errors -600 procNotFound No eligible process with specified process serial number -601 memFragErr Not enough room to launch application with special requirements -602 appModeErr Memory mode is 32-bit, but application is not 32-bit clean -603 protocolErr app made module calls in improper order -604 hardwareConfigErr hardware configuration not correct for call -605 appMemFullErr Partition size specified in 'SIZE' resource is not big enough for launch -606 appIsDaemon Application is background-only -607 bufferIsSmall Buffer is too small -608 noOutstandingHLE No outstanding high-level event -609 connectionInvalid Connection is invalid -610 noUserInteractionAllowed Attempted PostHighLevelEvent from background and no session yet established Virtual Memory Dispatch Errors -620 notEnoughMemoryErr Insufficient physical memory -621 notHeldErr Specified range of memory is not held -622 cannotMakeContiguousErr Cannot make specified range contiguous -623 notLockedErr Specified range of memory is not locked -624 interruptsMaskedErr Called with interrupts masked -625 cannotDeferErr Unable to defer additional user functions Database Access (PACK13) Errors -800 rcDBNull The data item was NULL -801 rcDBValue Data available or successfully retrieved -802 rcDBError Error executing function -803 rcDBBadType Next data item not of requested data type -804 rcDBBreak Function timed out -805 rcDBExec Query currently executing -806 reDBBadSessID Session ID is invalid -807 rcDBBadSessNum Invalid session number -808 rcDBBadDDEV CouldnΓÇÖt find the specified database extension, or error occurred in opening database extension -809 rcDBAsyncNotSupp The database extension does not support asynchronous calls -810 rcDBBadAsyncPB Invalid parameter block specified -811 rcDBNoHandler There is no handler for this data type installed for the current application -812 rcDBWrongVersion Wrong version number -813 rcDBPackNotInited The InitDBPack function has not yet been called Balloon Help Manager Errors -850 hmHelpDisabled Help balloons are not enabled -851 hmResNotFound ???? -852 hmMemFullErr ???? -853 hmBalloonAborted Because of constant cursor movement, the help balloon wasnΓÇÖt displayed -854 hmSameAsLastBalloon Menu and item are same as previous menu and item -855 hmHelpManagerNotInited Help menu not set up -856 hmBadSelector ???? -857 hmSkippedBalloon No ballon content to fill in -858 hmWrongVersion Wrong version of Help Manager resource -859 hmUnknownHelpType Help message record contained a bad type -860 hmCouldNotLoadPackage ???? -861 hmOperationUnsupported Bad method parameter -862 hmNoBalloonUp No balloon showing -863 hmCloseViewActive User using Close View wonΓÇÖt let you remove balloon AppleTalk PPC Toolbox Errors -900 notInitErr PPC Toolbox has not been initialized yet -902 nameTypeErr Invalid or inappropriate locationKindSelector in location name -903 noPortErr Invalid port name; Unable to open port or bad port reference number -904 noGlobalsErr System unable to allocate memory, critical error -905 localOnlyErr Network activity is currently disabled -906 destPortErr Port does not exist at destination -907 sessTableErr PPC Toolbox is unable to create a session -908 noSessionErr Invalid session reference number -909 badReqErr Bad parameter or invalid state for this operation -910 portNameExistsErr Another port is already open with this name -911 noUserNameErr User name unknown on destination machine -912 userRejectErr Destination rejected the session request -915 noResponseErr Unable to contact application -916 portClosedErr The port was closed -917 sessClosedErr The session has closed -919 badPortNameErr PPC port record is invalid -922 noDefaultUserErr User has not specified owner name in Sharing Setup control panel -923 notLoggedInErr Default user reference number does not yet exist -924 noUserRefErr Unable to create a new user reference number -925 networkErr An error has occurred in the network -926 noInformErr PPCStart failed because target application did not have an inform pending -927 authFailErr UserΓÇÖs password is wrong -928 noUserRecErr Invalid user reference number -930 badServiceMethodErr Service method is other than ppcServiceRealTime -931 badLocNameErr Location name is invalid -932 guestNotAllowedErr Destination port requires authentication AppleTalk NBP Errors -1024 nbpBuffOvr Buffer overflow in LookupName -1025 nbpNoConfirm Name not confirmed on ConfirmName -1026 nbpConfDiff Name confirmed at different socket -1027 nbpDuplicate Duplicate name exists already -1028 nbpNotFound Name not found on remove -1029 nbpNISErr Error trying to open the NIS AppleTalk ASP (XPP Driver) Errors -1066 aspBadVersNum Server cannot support this ASP version -1067 aspBufTooSmall Buffer too small -1068 aspNoMoreSess No more sessions on server -1069 aspNoServers No servers at that address -1070 aspParamErr Parameter error -1071 aspServerBusy Server cannot open another session -1072 aspSessClosed Session closed -1073 aspSizeErr Command block too big -1074 aspTooMany Too many clients (server error) -1075 aspNoAck No ack on attention request (server err) AppleTalk ATP Errors -1096 reqFailed Request to contact router failed: retry count exceeded -1097 tooManyReqs Too many concurrent requests -1098 tooManySkts Too many concurrent responding-sockets -1099 badATPSkt Bad ATP-responding socket -1100 badBuffNum Bad response buffer number specififed -1101 noRelErr No release received -1102 cbNotFound Control Block not found; no pending asynchronous calls -1103 noSendResp AddResponse issued without SendResponse -1104 noDataArea No data area for request to MPP -1105 reqAborted ERdCancel function called for this ERead [SendRequest aborted by RelTCB] AppleTalk DSP Errors -1273 errOpenDenied Open request denied by recipient -1274 errDSPQueueSize Send or receive queue is too small -1275 errFwdReset Read terminated by forward reset -1276 errAttention Attention message too long -1277 errOpening Attempt to open connection failed -1278 errState Bad connection state for this operation -1279 errAborted Request aborted by dspRemove or dspClose function -1280 errRefNum Bad connection reference number New HFS Errors -1300 fidNotFound File ID not found [No file thread exists] -1301 fidExists File id already exists -1302 notAFileErr Specified file is a directory -1303 diffVolErr Files on different volumes -1304 catChangedErr Catalog has changed and CatPosition may be invalid -1305 desktopDamagedErr The desktop database has become corrupted ΓÇö the Finder will fix this, but if your application is not running with the Finder, use DTReset or DTDelete AppleEvent Errors -1700 errAECoercionFail Data could not be coerced to the requested descriptor type -1701 errAEDescNotFound Descriptor record was not found -1702 errAECorruptData Data in an Apple event could not be read -1703 errAEWrongDataType Wrong descriptor type -1704 errAENotAEDesc Not a valid descriptor record -1705 errAEBadListItem Operation involving a list item failed -1706 errAENewerVersion Need a newer version of the Apple Event Manager -1707 errAENotAppleEvent Event is not an Apple event -1708 errAEEventNotHandled Event wasnΓÇÖt handled by an Apple event handler -1709 errAEReplyNotValid AEResetTimer was passed an invalid reply -1710 errAEUnknownSendMode Invalid sending mode was passed -1711 errAEWaitCanceled User canceled out of wait loop for reply or reciept -1712 errAETimeout Apple event timed out -1713 errAENoUserInteraction No user interaction allowed -1714 errAENotASpecialFunction Wrong keyword for a special function -1715 errAEParamMissed Handler did not get all required paramters -1716 errAEUnknownAddressType Unknown Apple event address type -1717 errAEHandlerNotFound No handler found for an Apple event or a coersion -1718 errAEReplyNotArrived Reply has not yet arrived -1719 errAEIllegalIndex Not a valid list index AppleTalk - ATP Errors -3101 buf2SmallErr Packet too large for buffer; partial data returned -3102 noMPPErr No MPP error -3103 ckSumErr Check sum error -3104 extractErr Extraction error -3105 readQErr Read queue error -3106 atpLenErr ATP length error -3107 atpBadRsp ATP bad response error -3108 recNotFnd Record not found -3109 sktClosedErr Socket closed error Print Manager with LaserWriter Errors -4096 ??? No free Connect Control Blocks available -4097 ??? Bad connection reference number -4098 ??? Request already active -4099 ??? Write request too big -4100 ??? Connection just closed -4101 ??? Printer not found, or closed File Manager Extension and AppleTalk AFP Errors -5000 accessDenied Incorrect access for this file/folder -5006 DenyConflict Permission/Deny mode conflicts with the current mode in which this fork is already open -5015 NoMoreLocks Byte range locking failure from Server -5020 RangeNotLocked Attempt to unlock an already unlocked range -5021 RangeOverlap Attempt to lock some of an already locked range APPLETALK AFP ERRORS -5000 afpAccessDenied AFP Access denied -5001 afpAuthContinue AFP Authorization continue -5002 afpBadUAM AFP Bad UAM -5003 afpBadVersNum AFP Bad version number -5004 afpBitmapErr AFP Bit map error -5005 afpCantMove AFP Can't move error -5006 afpDenyConflict AFP Deny conflict -5007 afpDirNotEmpty AFP Dir not empty -5008 afpDiskFull AFP Disk full -5009 afpEofError AFP End-of-File error -5010 afpFileBusy AFP File busy -5011 afpFlatVo AFP Flat volume -5012 afpItemNotFound AFP Information not found -5013 afpLockErr AFP Lock error -5014 afpMiscErr AFP Misc error -5015 afpNoMoreLocks AFP No more locks -5016 afpNoServer AFP No server -5017 afpObjectExists AFP Object already exists -5018 afpObjectNotFound AFP Object not found -5019 afpParmErr AFP Parm error -5020 afpRangeNotLocked AFP Range not locked -5021 afpRangeOverlap AFP Range overlap -5022 afpSessClosed AFP Session closed -5023 afpUserNotAuth AFP User not authorized -5024 afpCallNotSupported AFP Call not supported -5025 afpObjectTypeErr AFP Object type error -5026 afpTooManyFilesOpen AFP Too many files open -5027 afpServerGoingDown AFP Server going down -5028 afpCantRename AFP Can't rename -5029 afpDirNotFound AFP Directory not found -5030 afpIconTypeError Size of new icon and one it replaces donΓÇÖt match -5031 afpVolLocked Volume is Read-Only -5032 afpObjectLocked Object is M/R/D/W inhibited See next Chapter for more negative I.D. codes.